Fabricator ET 410iP
The Fabricator ET 410iP is built to withstand rugged use, making it a perfect solution for industrial usage. Ideal for heavy industries.
- The intuitive control panel of the ET 410iP makes it easy to optimize settings, reducing the time taken for achieving the best weld characteristics
- Equipped with High Frequency for easy arc starts and Start Pulse (micropulse) which preheats the Tungsten electrode for improved arc stability from the start.
- Pulse background current between 10% and 90% of the set current and pulsing frequency from 0.5 to 250Hz, for optimal pulse in each application.
- Spot mode for easy tack welding and 4TS to be able to pulse only when it’s necessary
- Wide mains voltage tolerance allows for stable welding
- Inverter controlled for high efficiency and low power consumption
- Excellent welding performance with Stick electrodes
Specifications
| Specifications | |
|---|---|
| Voltage | 380-400-415-440 V 3, 50/60 Hz |
| Welding Output | 310 A / @ 100 % Duty Cycle 400 A / @ 60 % Duty Cycle |
| Open Circuit Voltage | 76/15 V |
| Efficiency at Maximum Current | 89 % 86 % |
| Setting Range MMA/DC | 30 – 410 A |
| Setting Range TIG/DC | 5 – 410 A |
| Fuse Slow | 32 A |
| Voltage Steps | ET 410iP |
| Operating Temp | -10 – +40 °C |
| Enclosure Class | IP23S |
| Certification | CE, CCC |
| Dimensions, L x W x H | 525 x 280 x 475 mm |
| Weight | 35.2 Kg |
Related products
-
Read more
Each TRISTAND pipe vise features integral folding legs for easy transport and setup, tool hangers and a base which overhangs the front legs for clear tool swing. Designed for pipe threading and fabrication, these tools deliver optimal efficiency.
-
Read more
2-roller plate bending machine
The production series are especially suitable for use in workshops. These roll bending machines with a working length of 1-2 meters and roller diameters of 75-85 mm are driven via manual crank on back gear.
The working shafts are arranged asymmetrically, spherically turned, and are held in place by maintenance-free dry plain bearings. The top shaft can be swung out one-handed toward the front. This shaft is locked with a closed blocking bearing.The clutch gears are to the left, so that even narrow pipes can be easily pulled off.
The bottom and back shafts can be adjusted from the right, outer side of the machine. The bottom shaft advances via handle and hand levers, the back shaft is continuously adjusted via handwheel and worm gear.
The back shaft can be tilted for conical rounding.The setting can be reproduced via position indicator. -
Read more
Simple and cost-effective four drive roll wire feeder for industrial manufacturing and fabricating.
Reviews
There are no reviews yet.