Renegade ET 300i / ET 300iP
The Renegade TIG are inverter based High frequency TIG (HF) and MMA/Stick machines with extreme power to weight ratio. The compact format makes it easy to carry and bring to any jobsite. Combined with high duty cycle and the ability to run the machine on long mains and welding cable makes this a superior welding machine for both on-and off site applications.
The machine has an automatic input voltage sensor and can operate with any input voltage between 208V and 528V in 3-phase and 230V in single phase.
| Specifications | |
|---|---|
| Voltage | 230-480 V 3, 50/60 Hz 230 V 1, 50/60 Hz |
| Max Output | 300 A |
| TIG (GTAW) Welding Output | 300 A / 22.0 V @ 40 % Duty Cycle 250 A / 20.0 V @ 60 % Duty Cycle 200 A / 18.0 V @ 100 % Duty Cycle |
| Stick (MMA) Welding Output | 300 A / 32.0 V @ 40 % Duty Cycle 250 A / 30.0 V @ 60 % Duty Cycle 200 A / 28.0 V @ 100 % Duty Cycle |
| Current Range | 5-300 A |
| Power Factor at Maximum Current | 0.96 |
| Fuse Slow | 16 A (400 V) |
| Energy Save Mode | 88 W |
| Enclosure Class | IP23 |
| Application Class | S |
| Certification | CE |
| Dimensions, L x W x H | 460 x 200 x 320 mm |
| Weight | 16.9 / 26.9 kg |
Accessories & Parts
Related products
-
Read more
Our Miller welding machine Gold star 402 has Superior arc welding performance with stick and TIG welding. This electric welder has a built-in arc control lets you get in tight without sticking the electrode. An electrode compensation circuit ensures consistent arc control performance regardless of the electrode size, the hot Start makes it easy to start difficult stick electrodes such as E-6010 and E-7018.
Line voltage compensation ensures consistent weld performance by keeping output power constant, even if primary input power varies by ±10 percent. The welder is power efficient for exceptional value and return on your investment., 115 V duplex receptacle provides 15 amps of auxiliary power. Equipped with thermal overload protection light indicates power shutdown. Helps prevent machine damage if the duty cycle is exceeded or airflow is blocked.
-
Read more
The Invertec® V155-S offers much more than you would expect from a welder this size. Weighing in at just under 15 lbs. (6.8 kg) the Invertec® V155-S is no lightweight contender. It packs the full punch of a heavyweight professional that you can take to the most demanding job sites. It features 120/230V auto reconnect operation and can operate from a portable generator. It can also plug into a 200 ft. (61 m) 230V extension cord so you can weld just about anywhere.
-
Read more
SIMPLE, VERSATILE, RELIABLE
The POWER MIG 215 MPi multi-process welder is a reliable, easy-to-use machine for the general fabricator, small contractor or repair personnel. The sleek and solid ergonomic design with multiple lift points maximizes mobility around the shop, and user-friendly technology makes the setup process and selection of weld settings incredibly simple. Take on any job – MIG, TIG, Stick or Flux-Cored – with the versatile POWER MIG 215 MPi welder.
350A Pulsed MIG Welding System (PowerConnect)
-
Read more
Sturdy design with galvanized metal casing for use in tough environments. Electronically controlled feeding gives accurate and stable arc. The 4-wheel feeder mechanism with grooves in both feed roll and pressure roll gives stable feeding and low wear on the wire, all to avoid operational disturbance.
The feeders are available with either 30 mm diameter rollers for wires 0.6 to 1.6 mm in Steel, Stainless and 0.9 to 1.6 mm in Aluminium. Choose your level of control. Multiple panel options with U6, U82 and the new MA25 panel specialised for Steel and Aluminium applications.
Reviews
There are no reviews yet.