Shop
Showing 145–160 of 200 results
-
No. 606 Standard Shape with Tray
Read moreHeavy-duty tool boxes for tradesmen’s use. Made of 18-gauge, cold-rolled prime steel. Two heavy-duty plated trunk-type catches. Plated top handle. Electrically welded construction. Continuous piano hinge. Durable baked red enamel finish, electrostatically sprayed.
-
Outback® 145 Engine Driven Welder
Read morePortable welder/generator with DC stick welding and AC generator output, great for service trucks, fence contractors, maintenance crews, farmers, and ranchers.
DETAILS
Built For The Outdoors!™
It’s great for service trucks, fence contractors, maintenance crews, farmers, ranchers and anyone who needs portable DC stick welding and AC generator power!
- Low-Lift™ Grab Bars
- More leverage for lifting unit on and off truck beds.
- Extra protection against product damage.
- Best in class feature!
- 1-1/4 in. (32 mm) Diameter Rugged Tube Frame
- Great for all-around sturdy protection.
- Largest diameter tube frame in its class!
- Best in class feature!
- 6.8 Gallon (25.7 Liter) Fuel Tank
- For extended run times, less frequent re-fueling.
- Large fuel fill opening for easy re-fueling too.
- Best in class feature!
- DC Welding with up to 1/8 in. (3.2 mm) Stick Electrode
- Up to 145 amps of DC output for many applications.
- 4,750 Watts Peak (4,250 Watts Continuous) AC Generator Power
- Many uses! Grinder, work lights, pump, motor starting, or emergency power.
- Plug in a Lincoln POWER MIG® 140C or POWER MIG® 180C for wire welding!
- Low-Lift™ Grab Bars
-
Oxygen/ Acytelele Cutting Equipment
Read more- Bevelling head angle can be set quickly and accurately.
- Cuts 5-50mm thick wall on pipe with 114-600mm (4-24) diameter.
- Low gear ratio and worm wheel drive.
- Manual chain-driven pipe cutting machine.
- Provides smooth, accurate cutting action.
- Smooth and accurate cutting action.
- Solidly constructed using brass, chromed and stainless steel parts.
- Supplied with 2.4m length of guide chain and selection of ANM cutting nozzles.
-
Pedestal Grinder With Coolant & Fittings
Read moreSpecial Features:
WHEEL FLANGES – Wheel flanges are of balanced design, the inner pair keyed to the spindle for positive drive for 18″ to 40 ” grinders.
TOOL RESTS – These are adjustable both in horizontal and vertical positions for allowing maximum wear and tear of the wheels.
DRIVE – Through V-belts to the spindle by an Electric Motor. Two speeds are provided to maintain peripheral speeds when the wheels wear out.
ELECTRICALS – 400/440 volts 3 phase 50 cycles ISI Mark Electric Motor with LT/LK/BETEX Push button starter direct on line with overload, undervoltage.
SPECIAL ACCESSORIES AT EXTRA COST: Coolant equipment, Twist drill Grinding Attachment, Dust Exhaust Equipment, Machine Light, Water Pot and Foundation Nuts & Bolts.
-
Phoenix CS
Read moreThe Phoenix CS is a heavy-duty 3-axis gantry designed to deliver accurate plasma and oxy-fuel cutting to a wide range of industries. The Phoenix CS design offers high productivity, exceptional performance, and great value with easy operation. A compact system delivers performance and long service life for light fabricators that need reliable productivity.
-
Pipeworx 400 Welding System 230/460 V
Read moreSimplified and optimized for pipe fabrication shop welding, the PipeWorx systems streamlined set-up with one touch welding, quick process changeover, and Pulsed and Modified Short-Arc MIG processes, makes training and turn-around times faster than ever before.
-
Plastic Pipe Welding Machine
Read moreApplicable Range:
Portable socket fusion tools are used for PP-R,PE pipes and fittings.Advantages:
1.Heating plate with teflon coated.
2.Two kinds of removable supporting stand, welding at multi-directions.
3.A set of dedicated wrench, convenient to use and carry.
4.Electronic constant temperature controller and indicating light.
5.Thermal insulation handle made of reinforced nylon.
6.Sockets with high quality adhesive coating, for longer lifetime and great fusion effect. -
Plate Cutter
Read more2-roller plate bending machine
The production series are especially suitable for use in workshops. These roll bending machines with a working length of 1-2 meters and roller diameters of 75-85 mm are driven via manual crank on back gear.
The working shafts are arranged asymmetrically, spherically turned, and are held in place by maintenance-free dry plain bearings. The top shaft can be swung out one-handed toward the front. This shaft is locked with a closed blocking bearing.The clutch gears are to the left, so that even narrow pipes can be easily pulled off.
The bottom and back shafts can be adjusted from the right, outer side of the machine. The bottom shaft advances via handle and hand levers, the back shaft is continuously adjusted via handwheel and worm gear.
The back shaft can be tilted for conical rounding.The setting can be reproduced via position indicator. -
Pliers
Read moreFeatures
- Professional quality tools, precision crafted for ultimate balance, high strength and exacting performance.
- Forged and heat-treated for extended life and durability.
- Slip Joint and Tongue and Groove pliers feature a flush rivet design that provides a stronger tool and allows access to tighter areas.
- Cushioned grips are designed for comfort only. They are NOT intended as insulation against electric shock.
-
Pneumatic Scissors Lift
Read more- This pneumatic scissor lift table runs on air with no electrics or hydraulics used
- Great for pharmaceutical and medical areas – clean and quite operation
- Low maintenance
- Capacity: 1000kg
- Table Size: 812x1220mm (WxL)
- Base Frame Size: 784x1220mm (WxL)
- Low Height: 230mm
- Max Height: 840mm
- Raise Time: 40-45 seconds
- Air Pressure: 0.6 MPA
- Unit Weight: 263kgs
-
Portability and excellent arc performance make the XMT family the most popular in the industry. The XMT 450 CC/CV is the most popular model for its flexibility and simplicity.
Read moreProcesses
Air Carbon Arc Cutting and Gouging (CAC-A)Flux Cored (FCAW)MIG (GMAW)MultiprocessStick (SMAW)TIG DC (GTAW-DC)General Specifications
Title XMT® 450 CC/CV 230/460 V Industries Interests Construction and Fabrication
Manufacturing
Railcar
ShipbuildingWeldable Metals Aluminum
Specialty Metals
Stainless Steel
SteelInput Voltage 220/230/240 V
460/480 VRated Carbon Diameter 3/8 in (9.5 mm) Input Phase 3-Phase Input Hz 60 Hz Input Amperage 3 Phase – 230 V (51 A), 460 V (27.6 A) Current Type DC Max Open Circuit Voltage 90 VDC Portability Handle(s)
Running Gear / Cart (Optional)Weld Output CC / CV Net Width 14.5 in Net Height 17.25 in Net Length 27.125 in Net Weight 122 lbs
