ESAB Cutmaster® 40
The Cutmaster® 40 with SL60™ 1Torch® is the perfect combination of end-user insight, advanced technology, and intelligent design. Packed with power and offering the highest power-to-weight ratio in its class, the Cutmaster 40 with SL60 1Torch also has best in class cutting arc length and the most empowering and engaging user experience no matter the application.
| Specifications | |
|---|---|
| Amp Low – High | 15 A – 40 A |
| Input Ratings | 200-240 ±10% VAC, 1 ph, 50/60 Hz |
| Duty Cycle | 40 A @ 35 % duty cycle 20 A @ 100 % duty cycle 30 A @ 60 % duty cycle |
| Gas Requirements | Compressed Air |
| Gas Pressure | 6.2-8.6 bar |
| Gas Flow | 142-235 l/min |
| Pierces | 12 mm |
| Plate Thickness 1 mm 2 mm 4 mm 5 mm 6 mm 9 mm 13 mm |
Recommended Cut Speed 7670 mm/min 6985 mm/min 2667 mm/min 1778 mm/min 762 mm/min 508 mm/min 254 mm/min |
| Recommended Cut | up to 12 mm |
* at Maximum Cut Capacity
Accessories & Parts
Related products
-
Be and Decker Welding Machine
Read moreThe inverter AC has the ability to change the frequency of the welding current and the frequency of the welding current is 60 Hz, the same as the mains current. Inverter condenser welding machines are mainly used for ring projection welding and multi-point projection welding.
-
ESAB Wire Feeder FEED-3004
Read moreSturdy design with galvanized metal casing for use in tough environments. Electronically controlled feeding gives accurate and stable arc. The 4-wheel feeder mechanism with grooves in both feed roll and pressure roll gives stable feeding and low wear on the wire, all to avoid operational disturbance.
The feeders are available with either 30 mm diameter rollers for wires 0.6 to 1.6 mm in Steel, Stainless and 0.9 to 1.6 mm in Aluminium. Choose your level of control. Multiple panel options with U6, U82 and the new MA25 panel specialised for Steel and Aluminium applications.
Reviews
There are no reviews yet.