Renegade ET 300i / ET 300iP
The Renegade TIG are inverter based High frequency TIG (HF) and MMA/Stick machines with extreme power to weight ratio. The compact format makes it easy to carry and bring to any jobsite. Combined with high duty cycle and the ability to run the machine on long mains and welding cable makes this a superior welding machine for both on-and off site applications.
The machine has an automatic input voltage sensor and can operate with any input voltage between 208V and 528V in 3-phase and 230V in single phase
Specifications
| Specifications | |
|---|---|
| Voltage | 230-480 V 3, 50/60 Hz 230 V 1, 50/60 Hz |
| Max Output | 300 A |
| TIG (GTAW) Welding Output | 300 A / 22.0 V @ 40 % Duty Cycle 250 A / 20.0 V @ 60 % Duty Cycle 200 A / 18.0 V @ 100 % Duty Cycle |
| Stick (MMA) Welding Output | 300 A / 32.0 V @ 40 % Duty Cycle 250 A / 30.0 V @ 60 % Duty Cycle 200 A / 28.0 V @ 100 % Duty Cycle |
| Current Range | 5-300 A |
| Power Factor at Maximum Current | 0.96 |
| Fuse Slow | 16 A (400 V) |
| Energy Save Mode | 88 W |
| Enclosure Class | IP23 |
| Application Class | S |
| Certification | CE |
| Dimensions, L x W x H | 460 x 200 x 320 mm |
| Weight | 16.9 / 26.9 kg |
Related products
-
ESAB Wire Feeder FEED-3004
Read moreSturdy design with galvanized metal casing for use in tough environments. Electronically controlled feeding gives accurate and stable arc. The 4-wheel feeder mechanism with grooves in both feed roll and pressure roll gives stable feeding and low wear on the wire, all to avoid operational disturbance.
The feeders are available with either 30 mm diameter rollers for wires 0.6 to 1.6 mm in Steel, Stainless and 0.9 to 1.6 mm in Aluminium. Choose your level of control. Multiple panel options with U6, U82 and the new MA25 panel specialised for Steel and Aluminium applications.
-
MIG (GMAW)
Read moreMIG welding (GMAW – Gas Metal Arc Welding) is the most common process used in home shops, small businesses, manufacturing and metal fabrication applications. Choose from single-phase Millermatic® all-in-one MIG welding machines or more powerful three-phase MIG welding systems that suit an endless variety of applications, including stainless steel and aluminum welding.
-
POWER MIG® 215 MPi™ Multi-Process Welder
Read moreSIMPLE, VERSATILE, RELIABLE
The POWER MIG 215 MPi multi-process welder is a reliable, easy-to-use machine for the general fabricator, small contractor or repair personnel. The sleek and solid ergonomic design with multiple lift points maximizes mobility around the shop, and user-friendly technology makes the setup process and selection of weld settings incredibly simple. Take on any job – MIG, TIG, Stick or Flux-Cored – with the versatile POWER MIG 215 MPi welder.
350A Pulsed MIG Welding System (PowerConnect)
-
Baileigh Welding Machine BW 160
Read moreThe Baileigh Industrial BW-160A MIG welder is a fantastic way of getting started in MIG welding. It is a High Performance Machine with a high Duty cycle and gas is not required because the machine can run gas-less wire. The machine is easy to operate, just two knobs – voltage and wire speed. Being an inverter machine, it’s light (22lbs empty) and powerful with infinite adjustment on the voltage and wire speed so you can weld the thinnest materials from panel steel up to steel that is 10 millimeters thick.
Reviews
There are no reviews yet.